Company info

WHY CHOOSE KINGLAI-VALVES

  • Hygienic Fluid Equipment Professional manufacturers.

  • Strict Sanitary Standards & High Compatibility.

  • We Pursue our Customers Satisfaction With Pride.

       KingLai group mainly focuses on developing and manufacturing of high level hygienic items made from high purity stainless steel raw materials. Our main products includes chambers, valves, pumps, flanges, pressure vessels, tubes, fittings, etc. as total 68 series and more than 10000 different specifications, which are the key components of hygienic stainless steel products. The products are widely applied in Electronic Specialty Gas, solar, bio-technology, pharmaceuticals, fine chemical, food& beverage, dairy, cosmetics, vaccine, etc. Kinglai has been certified by ASME BPE in 2013 for both tubing and fitting (*manufacturer), which is NO.1 in Asia. Also, KL products comply with 3A, DIN, ISO, EHEDG, etc. KingLai has gained highly compliments from worldwide customers for our leading technologies and processes, completed production lines and quick customized capabilities. We always carry out “The clients’ success is our success” as our faith.

DIAPHRAGM VALVES

                              Technical Parameters:

Control mode:Manual,Pneumatic normally closed/double acting

Automatic control: feedback device/automatic regulator/cylinder stroke switch

Valve body material: CF3M (A351), 316L (BPE)

Diaphragm material: EPDM, EPDM+PTFE

Size specification: DN4 – DN80

Connection method: welding / clamping / welding clamping ASME BPE, 3A, ISO, DIN

Surface treatment: external surface sandblasting, internal surface Ra ≤ 0.5μm, Ra ≤ 0.375μm

Certification: 3A, CE

STERILE FORGING DIAPHRAGM VALVE

Compact Structure that is Compliant with ASME BPE structural design, thereby avoiding the bacterial breeding hazard caused by the presence of fluid retention zone in the mouth.In terms of surface oxidation resistance and long-term anticorrosion performance, forged bodies have significant advantages.

STERILE CASTING DIAPHRAGM VALVE

Advanced casting technology, the cast body ferrite content is strictly controlled within the standard range.The size of the main pipe is larger than that of the branches to ensure the circulation of the main pipeline.Compact structure, fully self-drained, and without dead corners.Applicable to high-purity water system, drainages and taps.

TU-WATER POINT DIAPHRAGM VALVE

To avoid the retention of the bacterial at the barrier of U-shaped tee through diaphragm valves, reduce the number of welds and improve the smoothness of the contact surface (MOC) with a minimum length of the horizontal pipe. The valve must ensure an absolute safe loop and prevent environmental damage, which will also be worn as a junction point.

MU-U TYPE DIAPHRAGM VALVE

The valve must ensure an absolute safe loop and prevent environmental damage, which will also be worn as a junction point. Therefore this valve must have highest level of security and cleanlinessTo avoid the retention of the bacterial at the barrier of U-shaped tee through diaphragm valves, reduce the number of welds and improve the smoothness of the contact surface (MOC) with a minimum length of the horizontal pipe.

MULTI - PORT DIAPHRAGM VALVE

Multi-channel diaphragm valves can save installation space and time, reduce cost, and can be used as a substitute in the valves. Evolution of multi-channel valves are : T-valve with sterilizing port, Integrated GMP valve, Chromatography valve.

SAP/GMP DIAPHRAGM VALVE

The KGMP / SAP diaphragm valves are available in a variety of angles and positions with forging or casting materials.Horizontal installation of the main valve with automatic drainage and vertical installation of the branch valve at the left side & right side.Horizontal installation of the main valve with automatic drainage and automatic drainage for the branch vertically installed at the left side.Vertical installation of the main valve and automatic drainage for the branch horizontally installed.

TANK OUTLET VALVE

King Lai tank outlet valves are mainly used in pharmaceutical, food and beverage industries, and are generally installed at the bottoms of the tanks for sampling and drainage. They can also be integrated for SIP/CIP. KINGLAI’s tank outlet valves are evolved on the basis of the diaphragm valves with the sealing weir as close as possible to the tank wall to avoid dead ends at the bottom of the tank.

DIAPHRAGMS

Two options are provided for the material of diaphragms: EPDM soft artificial rubber and TFM rigid artificial rubber. Single or double diaphragm designs are available. The double diaphragm design allows two diaphragms to work independently, thus reducing the tension caused by different thermal properties.

 

SHARE US YOUR REQUIREMENT
OUR SALES TEAM WILL REACH YOU SHORTLY